產品詳情
  • 產品名稱:ProteinA/GAgaroseBeads

  • 產品型號:
  • 產品廠商:Exalpha
  • 產品文檔:
你添加了1件商品 查看購物車
簡單介紹:
ProteinA/GAgaroseBeads
詳情介紹:
Purpose Our recombinant Protein A and G combines the binding characteristics of Protein A and Protein G, providing an easy way to purify most immunoglobulins.
Characteristics Ligand Density: approximately 6 mg/ml of Protein A and 2 mg/ml of Protein G of drained gel
Dynamic Binding Capacity: approximately 18 to 35 mg human IgG per ml of drained gel (estimated in a0.7x5cm column at a linear flow rate of 300 cm/h under the following conditions: binding buffer: 0.1 M PBS pH7.0, Eluting buffer 0.1 M citrate pH 3.0. 2.8 times excess IgG of the binding capacity was applied.
Bead Structure: 4% highly cross-linked agarose
Bead Size Range: 45 to 165 μm
Mean Bead Size: approximately 90 μm
Maximum Linear Flow Rate: >1300 cm/hour at 25 deg C in an XK 16/20 column, bed height 5 cm
pH Stability: Long term storage - 3 to 9: short term storage - 2 to 10
Chemical Stability: IgG binding capacity and recovery maintained after storage for (a) 7 days at 40o C in 3MNaSCN, 6M guanidine-HCl, 0.1M glycine (pH3.0), 70% ethanol: 10 hours at 23 o C in 8M urea, 0.1M glycine(pH 11), 5.8M acetic acid (pH 2.0)
Physical stability: Negligible volume variation due to changes in pH or ionic strength
Sanitization: Sanitize the packed column with 2% Hibitane/20% ethanol or with 70% ethanol
ProductDetails: Bead Ligand Protein A,Protein G
ProductDetails: Bead Matrix Agarose beads
ProductDetails: Bead Size 90 μm
Comment

Recombinant Protein A/G Agarose is produced by mixing equal amounts of our superior recombinant Protein A and Protein G agarose products.

Restrictions For Research Use only
Format Liquid
Handling Advice Do not freeze the resin.
Storage 4 °C
Storage Comment Product should be stored at 4-8°C.
Expiry Date 12 months